http://www.cn-szlanxin.com/en/data/images/slide/20220411164840_402.jpg

Contact

Suzhou Lanxin Rubber Plastic Hardware Co., Ltd.

Contact person: Manager Yin

Phone: 18051899559

Email address: info133@cn-lanxin.com

Contact person: Manager Pan

Phone: 18261672909

Email address: info164@cn-lanxin.com

Machine: 0512-36857023

Website: www.cn-szlanxin.com

Address: No. 904, South Qinfeng Road, Qiandeng Town, Kunshan City, Jiangsu Province


current position: Home >> News >> Industry news

The method of removing acrylic double-sided adhesive is introduced briefly

2020-03-23

Usually in daily life if items are stuck with acrylic double-sided adhesive, double-sided adhesive customized company tells you that you can take the following measures to effectively remove:



1, transparent tape to division:


Transparent tape can be used to remove the sticky material, so that the sticky material does not leave traces.



2, balm to division


Can besmear bit of balm essence on the mark that leave, wipe can, more effective.




3. Alcohol division


With a soft cloth dipped in 95% alcohol, and then gently wipe the acrylic double-sided adhesive, acrylic double-sided adhesive will easily become soft off, and alcohol generally does not have any damage to plastic parts or car paint surface.


Sometimes it is found that alcohol is not very effective for some acrylic double-sided adhesive, which is determined by the characteristics of acrylic double-sided adhesive, then you can use a soft cloth dipped in a little gasoline to gently rub acrylic double-sided adhesive, must be careful to use: can be wiped in the first place is not important to observe, if there is no problem to use; At this time should be careful not to use too much gasoline and for a short time. In this way, acrylic double-sided adhesive is very easy to remove.


Suzhou Lanxin Rubber & Plastic Hardware Co., Ltd. is a professional production and design of silicone rubber, double-sided rubber, insulation materials, foaming materials processing group enterprises. Insulation and high temperature resistant materials company was established in 1997, headquartered in Dongguan Shipai. The company has offices in Hong Kong, Taiwan, Suzhou, Beijing and Chengdu. The company has more than 400 employees. Existing self-built I industrial park more than 30,000 square meters. Divided into die-cutting coating, silicone rubber vulcanization molding, screen printing plate, precision hardware four blocks. In 2012, we set up a branch factory in Suzhou, covering an area of about 3000 square meters, which is divided into die cutting, screen printing, vulcanization molding three blocks. The address is located in No. 904, Qinfeng South Road, Qiandeng Town, Kunshan City, Jiangsu Province, close to Shanghai, Suzhou and other cities, convenient transportation and superior geographical environment.



相关产品

相关新闻