Acrylic double-sided adhesive in the decoration and other areas of demand is relatively large. Acrylic double-sided adhesive is characterized by good sealing, compression resistance, flame retardant and so on. How to use acrylic double-sided adhesive? The following is the introduction of the characteristics and use of acrylic double-sided adhesive manufacturers xiaobian.

A, the use of acrylic double-sided glue

Acrylic double-sided adhesive is suitable for use between 21 degrees -38 degrees. The pressure is 5KG/cm2.3. Be careful to completely remove oil and dust from the substrate. Tear the acrylic double-sided adhesive, pay attention to remove contaminants. (Watch for fingerprints or other contaminants). Surface roughness is the main factor that determines the thickness of acrylic double-sided adhesive. When used, the surface with large fluctuation should be erased, and the fine dust must be removed after erasure. Surface roughness tolerance is not more than half of acrylic double-sided adhesive. According to the size of the base material, cut off the acrylic double-sided adhesive, after the hard extrusion. Acrylic double-sided adhesive surface and pressure, when the need for adequate pressure. For plastic, rubber, special coating materials, need the bottom coating. When the acrylic double-sided adhesive is saved, the side of the acrylic double-sided adhesive should be the same as above, and the accumulation does not exceed 2M. Place the acrylic double-sided adhesive in the dark, away from direct sunlight. The service life of acrylic double-sided adhesive is normally one year from the date of production.

Two, the characteristics of acrylic double-sided adhesive

Acrylic double-sided adhesive: EVA or PE foam as the base material, on one or both sides of the coated with solvent (or hot melt type) pressure-sensitive adhesive, and then compounded with release paper. It is mainly used for hook fixing, nameplate pasting, utensils fixing, cushion gasket, hardware processing, interior decoration and other pasting. And has the function of sealing and shock absorption.

Main characteristics of acrylic double-sided adhesive:

1, with good sealing, avoid gas release and atomization.

2, good compression deformation resistance, that is, elasticity with durability, can ensure that accessories obtain long-term shock protection.

3, flame retardant, does not contain harmful and toxic substances, will not remain, will not pollute the equipment, is not corrosive to metal.

4, can be used in a variety of temperature range.

5, the surface has good wettability, easy to stick, easy to make, easy to cut.

The company's products can be customized according to customer requirements, fit all kinds of imported acrylic double-sided adhesive, good viscosity.