With the rapid industrial development needs, liquid silica gel and dispensing equipment is also constantly developing to ultra-high precision control and diversification and specialization. Nowadays liquid control technology and dispensing equipment are widely used in various production fields in modern industry. Next, we will simply understand the daily maintenance steps of liquid silica gel feeder.

1, replace the rubber, need to clean the pipeline. At this time, first turn off the feeding valve, open the discharge valve, discharge the remaining plastic material from the plastic bucket, turn off the discharge valve, open the feeding valve, pour the cleaning solvent into the plastic bucket, activate the body, press the solvent out and flush according to the usual operation method.

2. If the standard air pressure inlet is abnormal and there is water gas, please remove the water gas in the pressure regulating filter device or check the standard air pressure source. Silicone glue dispenser in large quantities before the use of glue, please try a small amount of first, master the use of the product skills, to prevent errors, when there is no problem in the test, then use double liquid glue dispenser or double liquid glue filling machine for mass production; Vacuuming system for glue vacuuming and defoaming treatment, in order to remove the bubbles generated in the process of mixing, or stand for 10-20 minutes before use, in order to make the bubbles generated when mixing removed in time, the more glue mixed in a piece.

3. Please scrub the machine regularly to improve its service life. The more glue mixed in a piece, the reaction will be faster and faster, the curing speed will be faster and faster, so according to the specific production situation of reasonable glue, otherwise lead to the waste of glue. Eliminate accidents and improve production efficiency. Nowadays liquid control technology and dispensing equipment are widely used in various production fields in modern industry.