Silica gel products customized not oil resources, which make silicone products similar to substitute for plastic products is the trend of The Times, at the same time, the silicone products can be applied to many plastic products can't accomplish the purpose of the category, such as the pacifier, human organs, etc., and silica gel products market prospect is very broad.

First, the quality of silica gel products will form silica gel products difficult to disassemble the edge, the poor quality of silica gel products customized raw materials its toughness is not enough, the tearing strength is also significantly insufficient, in the process of disassembly is obviously difficult to disassemble the edge.

Second, in the molding stage of the product molding is relatively thick, so although the burr is relatively thick, the improvement of thickness obviously also forms the difficulty of edge removal.

Three, vulcanization environment elements, vulcanization temperature should be suitable for, too high too low problems will form difficult to remove the edge, and vulcanization time also needs good control, vulcanization time is too long will form the product brittle, vulcanization time is too short will form the vulcanization stage no effect, so the stage of vulcanization must be controlled well.

Four, the molding mold this aspect of the problem, assuming that the mold self-disassembly design is not reasonable, the molding mold is too long, the molding mold wear is severe, the quality of the molding mold is not qualified, these situations will lead to the production of molding is difficult to disassemble.

Silica gel products customized not oil resources, which make silicone products similar to substitute for plastic products is the trend of The Times, at the same time, the silicone products can be applied to many plastic products can't accomplish the purpose of the category, such as the pacifier, human organs, etc., and silica gel products market prospect is very broad.